Dear CAESAR Users,

Chempute Software will be presenting a 5-day CAESAR Dynamics (Advanced) Stress Analysis Training Course at our training center in Woodmead, Johannesburg.

Attend and expect the following topics:

General Scope:
This course addresses Advanced Statics and Dynamic Analysis topics in Pipe Stress Analysis. We also have a 5-day Course that addresses Basic Statics Analysis. This presentation is based on a hands-on solution of example problems in order to illustrate Pipe Stress Analysis using CAESAR software.

Previous experience in Pipe Stress Analysis, plus experience in using CAESAR, or attendance of the Basic Statics Analysis Course is required. A discussion/question/answer format is also employed in order to maximize the retention of course material and theoretical concepts.

Persons attending the training should expect to leave the course with an advanced working knowledge of CAESAR II, and pipe flexibility analysis. Some of the specific topics covered are outlined below.

Chempute Software will provide a training venue, computers, training dongles, printed training notes, teas, lunches, course certificates.

What to expect:
This course will include the following topics:

• Basic theory of dynamic analysis

• Harmonic load analysis and forced vibration 
(incorporating frequency and displacement input, frequency phase pairs, results from examination and modification of input parameters,
static/dynamic combinations)

• Response spectrum analysis 
(incorporating single and multiple seismic spectra application, anchor movement, static/dynamic combinations)

• Time history analysis 
(incorporating Hammer Loads derivation and input at calculated time intervals, static/dynamic combinations)

• Survey of transient load evaluation through the relief valve

• Dynamic analysis workshop 
(incorporating natural frequency calculation)

• Dynamic load factor verification using a simple model

• Slug flow modeling 
(incorporating derivation of slug data, assumptions, static/dynamic combinations)

Our Presenter - Alan Stewart

Born in Zambia in 1957, Alan Stewart has been involved in Pipe Stress Analysis work for many years.  He attended lectures in Finite Element Stress Analysis and General Stress/Strain theory at Wits University - 1984.  and Second Order Finite Element Analysis with HKS, Rhode Island, USA.
He attended formal CAESAR training conducted by Rex Evans (co-founder of Coade), followed by training in FE/Pipe by Tony Paulin (co-founder of Coade and Paulin Research Group), and Advanced Caesar training by Dave Diehl (head of training at Coade).  Alan has been presenting CAESAR training courses for Chempute Software for over 30 years, during which time he has presented training courses in both Basic and Advanced Topics, in South Africa, Netherlands, Nigeria, Kuwait, UAE, Qatar and Saudi Arabia. 

He is a pipe stress consultant to Power Generation, Petro Chemical, Sugar, Paper, Mineral and other industries.

Register here for your Attendance

Click to register
01 to 05 August 2022

5 Days
CPD Points: 5

The course is priced at R 18 500 Excluding VAT per person, with a 10% discount for additional persons from the same company.
33 Riley Road, Pinewood Office Park, Woodmead, Chempute Software, Unit G14

For Enrollment details contact:
Lee-Anne Kylander via email: 

Phone us on: +27 11 803 6559
Go to Training Website

Get in Touch

Telephone: 031 764 6840 - Durban
Telephone: 011 803 6559 - Johannesburg

This email was sent to <<Email Address>>
why did I get this?    unsubscribe from this list    update subscription preferences
Chempute Software · 33 Riley Road, Pinewood Office Parks, Woodmead · Pinewood Square, Unit G14 · Johannesburg, GP 2057 · South Africa

Email Marketing Powered by Mailchimp